forked from community/product-iots
Rasika Perera
9 years ago
parent
813f67c44a
commit
eae80dd834
@ -1,83 +0,0 @@
|
||||
byte mac[6] = { 0x90, 0xA2, 0xDA, 0x0D, 0x30, 0xD7}; //mac - 90a2da0d30d7
|
||||
byte dns2[] = { 8, 8, 8, 8 };
|
||||
byte subnet[] = { 255, 255, 255, 0 };
|
||||
byte gateway[] = { 192, 168, 1, 1 };
|
||||
|
||||
byte deviceIP[4] = { 192, 168, 1, 219 };
|
||||
byte server[4] = { 192, 168, 1, 216 };
|
||||
|
||||
String connecting = "connecting.... ";
|
||||
|
||||
void connectHttp() {
|
||||
if(DEBUG) Serial.println("-------------------------------");
|
||||
|
||||
Ethernet.begin(mac, deviceIP, dns2, gateway, subnet);
|
||||
delay(2000);
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.print("My IP: ");
|
||||
Serial.println(Ethernet.localIP());
|
||||
}
|
||||
|
||||
connecting += httpClient.connect(server, SERVICE_PORT);
|
||||
delay(2000);
|
||||
if(DEBUG) Serial.println(connecting);
|
||||
|
||||
if (httpClient.connected()) {
|
||||
if(DEBUG) Serial.println("connected");
|
||||
} else {
|
||||
if(DEBUG) Serial.println("connection failed");
|
||||
|
||||
while(!httpClient.connected()){
|
||||
if(DEBUG) Serial.println("retrying to connect......");
|
||||
httpClient.connect(server, SERVICE_PORT);
|
||||
delay(2000);
|
||||
}
|
||||
|
||||
if(DEBUG) Serial.println("connected to server!");
|
||||
}
|
||||
if(DEBUG) Serial.println("-------------------------------");
|
||||
}
|
||||
|
||||
|
||||
void setupResource(){
|
||||
String hostIP = getHostIP(server);
|
||||
String port = String(SERVICE_PORT);
|
||||
|
||||
host = "Host: " + hostIP + ":" + port;
|
||||
if(DEBUG) Serial.println(host);
|
||||
|
||||
jsonPayLoad = String(OWNER_JSON);
|
||||
jsonPayLoad += String(DEVICE_OWNER);
|
||||
jsonPayLoad += String(DEVICE_ID_JSON);
|
||||
jsonPayLoad += String(DEVICE_ID);
|
||||
jsonPayLoad += String(REPLY_JSON);
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.print("JSON Payload: ");
|
||||
Serial.println(jsonPayLoad);
|
||||
Serial.println("-------------------------------");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
String getMyIP(){
|
||||
String myIP = "";
|
||||
myIP = String(Ethernet.localIP()[0]);
|
||||
|
||||
for ( int index = 1; index < 4; index++) {
|
||||
myIP += "." + String(Ethernet.localIP()[index]);
|
||||
}
|
||||
return myIP;
|
||||
}
|
||||
|
||||
|
||||
String getHostIP(byte server[4]){
|
||||
String hostIP = String(server[0]);
|
||||
|
||||
for ( int index = 1; index < 4; index++) {
|
||||
hostIP += "." + String(server[index]);
|
||||
}
|
||||
|
||||
return hostIP;
|
||||
}
|
||||
@ -1,48 +0,0 @@
|
||||
#ifndef FireAlarmEthernetAgent_H
|
||||
#define FireAlarmEthernetAgent_H
|
||||
|
||||
#if (ARDUINO >= 100)
|
||||
#include "Arduino.h"
|
||||
#else
|
||||
#include "WProgram.h"
|
||||
#endif
|
||||
|
||||
#define HTTP_POST "POST"
|
||||
#define HTTP_GET "GET"
|
||||
#define HTTP_VERSION "HTTP/1.1"
|
||||
#define HTTP_CONTENT_TYPE "Content-Type: application/json"
|
||||
#define HTTP_CONTENT_LEN "Content-Length: "
|
||||
|
||||
#define DEVICE_OWNER "${DEVICE_OWNER}" //"Smeansbeer"
|
||||
#define DEVICE_ID "${DEVICE_ID}" //"vbhenqyt85yq"
|
||||
#define DEVICE_TOKEN "${DEVICE_TOKEN}"
|
||||
|
||||
#define PUSH_ALARM_DATA "pushalarmdata"
|
||||
#define READ_CONTROLS "readcontrols/"
|
||||
#define REPLY "reply"
|
||||
|
||||
#define OWNER_JSON "{\"owner\":\""
|
||||
#define DEVICE_ID_JSON "\",\"deviceId\":\""
|
||||
#define REPLY_JSON "\",\"replyMessage\":\""
|
||||
#define TIME_JSON "\",\"time\":\""
|
||||
#define KEY_JSON "\",\"key\":\""
|
||||
#define VALUE_JSON "\",\"value\":\""
|
||||
#define END_JSON "\"}"
|
||||
|
||||
#define SERVICE_PORT 9763
|
||||
#define SERVICE_EPOINT "/firealarm/controller/"
|
||||
// pushalarmdata - application/json - {"owner":"","deviceId":"","replyMessage":"","time":"","key":"","value":""}
|
||||
// readcontrols/{owner}/{deviceId}
|
||||
// reply - application/json - {"owner":"","deviceId":"","replyMessage":""}
|
||||
|
||||
#define TEMP_PIN 3
|
||||
#define BULB_PIN 4
|
||||
#define FAN_PIN 5
|
||||
|
||||
#define DEBUG false
|
||||
#define POLL_INTERVAL 1000
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
@ -1,143 +0,0 @@
|
||||
#include "FireAlarmEthernetAgent.h"
|
||||
|
||||
#include <Ethernet.h>
|
||||
#include <SPI.h>
|
||||
#include "dht.h"
|
||||
|
||||
/**********************************************************************************************
|
||||
0. Check with a sample Ethernet code of the Ethernet library to ensure that the sheild is working
|
||||
1. Set the ip of the server(byte array below) where the Web-Rest API for the FireAlarm is running
|
||||
2. Check whether the "SERVICE_EPOINT" is correct in the 'FireAlarmWifiAgent.h' file
|
||||
3. Check whether the "SERVICE_PORT" is the same (9763) for the server running. Change it if needed
|
||||
4. Check whether the pins have been attached accordingly in the Arduino
|
||||
5. Check whether all reqquired pins are added to the 'digitalPins' array
|
||||
***********************************************************************************************/
|
||||
|
||||
int digitalPins[] = { TEMP_PIN, BULB_PIN, FAN_PIN };
|
||||
int analogPins[] = { 0, 1, 2, 3, 4, 5 };
|
||||
|
||||
EthernetClient httpClient;
|
||||
String host, jsonPayLoad, replyMsg;
|
||||
|
||||
void setup() {
|
||||
if(DEBUG) Serial.begin(9600);
|
||||
pinMode(BULB_PIN, OUTPUT);
|
||||
pinMode(FAN_PIN, OUTPUT);
|
||||
connectHttp();
|
||||
setupResource();
|
||||
}
|
||||
|
||||
void loop() {
|
||||
if (httpClient.connected()) {
|
||||
pushDigitalPinData();
|
||||
// pushData(); // Use this method to batch all data together and send in one call
|
||||
|
||||
delay(POLL_INTERVAL);
|
||||
|
||||
String responseMsg = readControls();
|
||||
int index = responseMsg.lastIndexOf(":");
|
||||
int newLine = responseMsg.lastIndexOf("\n");
|
||||
String subStrn = responseMsg.substring(index + 1);
|
||||
|
||||
if (subStrn.equals("IN")) {
|
||||
responseMsg = responseMsg.substring(newLine + 1, index);
|
||||
if (responseMsg.equals("TEMPERATURE")) {
|
||||
replyMsg = "Temperature is " + String(getTemperature()) + "C.";
|
||||
reply(replyMsg);
|
||||
} else if (responseMsg.equals("BULB")) {
|
||||
replyMsg = "Bulb was switched " + switchBulb();
|
||||
} else if (responseMsg.equals("FAN")) {
|
||||
replyMsg = "Bulb was switched " + switchFan();
|
||||
}
|
||||
}
|
||||
} else {
|
||||
if(DEBUG) {
|
||||
Serial.println("client not found...");
|
||||
Serial.println("disconnecting.");
|
||||
}
|
||||
httpClient.stop();
|
||||
connectHttp();
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
String getDataType(int pin){
|
||||
switch(pin){
|
||||
case TEMP_PIN:
|
||||
return "Temperature";
|
||||
case BULB_PIN:
|
||||
return "Bulb";
|
||||
case FAN_PIN:
|
||||
return "Fan";
|
||||
default:
|
||||
return String(pin);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
String switchBulb() {
|
||||
if (digitalRead(BULB_PIN) == HIGH) {
|
||||
digitalWrite(BULB_PIN, LOW);
|
||||
return "OFF";
|
||||
} else {
|
||||
digitalWrite(BULB_PIN, HIGH);
|
||||
return "ON";
|
||||
}
|
||||
}
|
||||
|
||||
String switchFan() {
|
||||
if (digitalRead(FAN_PIN) == HIGH) {
|
||||
digitalWrite(FAN_PIN, LOW);
|
||||
return "OFF";
|
||||
} else {
|
||||
digitalWrite(FAN_PIN, HIGH);
|
||||
return "ON";
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
double getTemperature(){
|
||||
dht DHT;
|
||||
if(DEBUG) {
|
||||
Serial.println("-------------------------------");
|
||||
Serial.println("Type,\tstatus,\tHumidity (%),\tTemperature (C)");
|
||||
Serial.print("DHT11, \t");
|
||||
}
|
||||
|
||||
int chk = DHT.read11(TEMP_PIN);
|
||||
switch (chk)
|
||||
{
|
||||
case DHTLIB_OK:
|
||||
if(DEBUG) Serial.print("OK,\t");
|
||||
break;
|
||||
case DHTLIB_ERROR_CHECKSUM:
|
||||
if(DEBUG) Serial.print("Checksum error,\t");
|
||||
break;
|
||||
case DHTLIB_ERROR_TIMEOUT:
|
||||
if(DEBUG) Serial.print("Time out error,\t");
|
||||
break;
|
||||
case DHTLIB_ERROR_CONNECT:
|
||||
if(DEBUG) Serial.print("Connect error,\t");
|
||||
break;
|
||||
case DHTLIB_ERROR_ACK_L:
|
||||
if(DEBUG) Serial.print("Ack Low error,\t");
|
||||
break;
|
||||
case DHTLIB_ERROR_ACK_H:
|
||||
if(DEBUG) Serial.print("Ack High error,\t");
|
||||
break;
|
||||
default:
|
||||
if(DEBUG) Serial.print("Unknown error,\t");
|
||||
break;
|
||||
}
|
||||
|
||||
// DISPLAY DATA
|
||||
if(DEBUG) {
|
||||
Serial.print("\t");
|
||||
Serial.print(DHT.temperature, 1);
|
||||
Serial.print(",\t\t");
|
||||
Serial.println(DHT.humidity, 1);
|
||||
Serial.println("-------------------------------");
|
||||
}
|
||||
return DHT.temperature;
|
||||
}
|
||||
@ -1,79 +0,0 @@
|
||||
String readControls() {
|
||||
String responseMsg;
|
||||
String resource = " " + String(SERVICE_EPOINT) + String(READ_CONTROLS) + String(DEVICE_OWNER) + "/" + String(DEVICE_ID) + " ";
|
||||
|
||||
httpClient.print(HTTP_GET);
|
||||
httpClient.print(resource);
|
||||
httpClient.println(HTTP_VERSION);
|
||||
httpClient.println(host);
|
||||
httpClient.println();
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.print(HTTP_GET);
|
||||
Serial.print(resource);
|
||||
Serial.println(HTTP_VERSION);
|
||||
Serial.println(host);
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
delay(1000);
|
||||
|
||||
while (httpClient.available()) {
|
||||
char response = httpClient.read();
|
||||
responseMsg += response;
|
||||
}
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.print(responseMsg);
|
||||
Serial.println();
|
||||
Serial.println("-------------------------------");
|
||||
}
|
||||
delay(1000);
|
||||
return responseMsg;
|
||||
}
|
||||
|
||||
void reply(String replyMsg) {
|
||||
String resource = " " + String(SERVICE_EPOINT) + String(REPLY) + " ";
|
||||
String payLoad = jsonPayLoad + replyMsg + String(END_JSON);
|
||||
|
||||
httpClient.print(HTTP_POST);
|
||||
httpClient.print(resource);
|
||||
httpClient.println(HTTP_VERSION);
|
||||
httpClient.println(host);
|
||||
httpClient.println(HTTP_CONTENT_TYPE);
|
||||
httpClient.print(HTTP_CONTENT_LEN);
|
||||
httpClient.println(payLoad.length());
|
||||
httpClient.println();
|
||||
httpClient.println(payLoad);
|
||||
httpClient.println();
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.print(HTTP_POST);
|
||||
Serial.print(resource);
|
||||
Serial.println(HTTP_VERSION);
|
||||
Serial.println(host);
|
||||
Serial.println(HTTP_CONTENT_TYPE);
|
||||
Serial.print(HTTP_CONTENT_LEN);
|
||||
Serial.println(payLoad.length());
|
||||
Serial.println();
|
||||
Serial.println(payLoad);
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
delay(1000);
|
||||
|
||||
while (httpClient.available()) {
|
||||
char response = httpClient.read();
|
||||
if(DEBUG) Serial.print(response);
|
||||
}
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.println();
|
||||
Serial.println("-------------------------------");
|
||||
}
|
||||
delay(1000);
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
@ -1,199 +0,0 @@
|
||||
|
||||
/**********************************************************************************************
|
||||
This method will traverse the array of digital pins and batch the data from the those pins together.
|
||||
It makes a single call to the server and sends all pin values as a batch.
|
||||
Server dis-assembles it accordingly and makes multiple publish calls for each sensor type.
|
||||
***********************************************************************************************/
|
||||
|
||||
void pushData(){
|
||||
String resource = " " + String(SERVICE_EPOINT) + String(PUSH_ALARM_DATA) + " ";
|
||||
String payLoad = jsonPayLoad + "DigitalPinData";
|
||||
payLoad = payLoad + String(TIME_JSON) + "9999";
|
||||
payLoad = payLoad + String(KEY_JSON) + "Data";
|
||||
payLoad += String(VALUE_JSON);
|
||||
|
||||
for ( int pin = 0; pin < (sizeof(digitalPins)/sizeof(int)); pin++) {
|
||||
if ( digitalPins[pin] == TEMP_PIN ) {
|
||||
payLoad += String(getTemperature());
|
||||
} else if ( digitalRead(digitalPins[pin]) == HIGH ) {
|
||||
payLoad += "ON";
|
||||
} else if ( digitalRead(digitalPins[pin]) == LOW ) {
|
||||
payLoad += "OFF";
|
||||
}
|
||||
|
||||
if ( ((sizeof(digitalPins)/sizeof(int)) - 1) != pin ) {
|
||||
payLoad += "-";
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
payLoad = payLoad + String(END_JSON);
|
||||
|
||||
if(DEBUG) Serial.println(payLoad);
|
||||
|
||||
httpClient.print(HTTP_POST);
|
||||
httpClient.print(resource);
|
||||
httpClient.println(HTTP_VERSION);
|
||||
httpClient.println(host);
|
||||
httpClient.println(HTTP_CONTENT_TYPE);
|
||||
httpClient.print(HTTP_CONTENT_LEN);
|
||||
httpClient.println(payLoad.length());
|
||||
httpClient.println();
|
||||
httpClient.println(payLoad);
|
||||
httpClient.println();
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.print(HTTP_POST);
|
||||
Serial.print(resource);
|
||||
Serial.println(HTTP_VERSION);
|
||||
Serial.println(host);
|
||||
Serial.println(HTTP_CONTENT_TYPE);
|
||||
Serial.print(HTTP_CONTENT_LEN);
|
||||
Serial.println(payLoad.length());
|
||||
Serial.println();
|
||||
Serial.println(payLoad);
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
delay(1000);
|
||||
|
||||
while (httpClient.available()) {
|
||||
char response = httpClient.read();
|
||||
if(DEBUG) Serial.print(response);
|
||||
}
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.println();
|
||||
Serial.println("-------------------------------");
|
||||
}
|
||||
delay(1000);
|
||||
}
|
||||
|
||||
/**********************************************************************************************
|
||||
This method will traverse the array of digital pins and publish the data from the those pins.
|
||||
It differs from the above method such that the pin data is published one after the other in
|
||||
seperate calls to the server
|
||||
***********************************************************************************************/
|
||||
|
||||
|
||||
void pushDigitalPinData(){
|
||||
for ( int pin = 0; pin < (sizeof(digitalPins)/sizeof(int)); pin++) {
|
||||
String resource = " " + String(SERVICE_EPOINT) + String(PUSH_ALARM_DATA) + " ";
|
||||
|
||||
String payLoad = jsonPayLoad + "DigitalPinData";
|
||||
payLoad = payLoad + String(TIME_JSON) + "9999";
|
||||
payLoad = payLoad + String(KEY_JSON) + getDataType(digitalPins[pin]);
|
||||
payLoad += String(VALUE_JSON);
|
||||
|
||||
|
||||
if ( digitalPins[pin] == TEMP_PIN ) {
|
||||
payLoad += String(getTemperature());
|
||||
} else if ( digitalRead(digitalPins[pin]) == HIGH ) {
|
||||
payLoad += "ON";
|
||||
} else if ( digitalRead(digitalPins[pin]) == LOW ) {
|
||||
payLoad += "OFF";
|
||||
}
|
||||
|
||||
payLoad = payLoad + String(END_JSON);
|
||||
|
||||
if(DEBUG) Serial.println(payLoad);
|
||||
|
||||
httpClient.print(HTTP_POST);
|
||||
httpClient.print(resource);
|
||||
httpClient.println(HTTP_VERSION);
|
||||
httpClient.println(host);
|
||||
httpClient.println(HTTP_CONTENT_TYPE);
|
||||
httpClient.print(HTTP_CONTENT_LEN);
|
||||
httpClient.println(payLoad.length());
|
||||
httpClient.println();
|
||||
httpClient.println(payLoad);
|
||||
httpClient.println();
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.print(HTTP_POST);
|
||||
Serial.print(resource);
|
||||
Serial.println(HTTP_VERSION);
|
||||
Serial.println(host);
|
||||
Serial.println(HTTP_CONTENT_TYPE);
|
||||
Serial.print(HTTP_CONTENT_LEN);
|
||||
Serial.println(payLoad.length());
|
||||
Serial.println();
|
||||
Serial.println(payLoad);
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
delay(1000);
|
||||
|
||||
while (httpClient.available()) {
|
||||
char response = httpClient.read();
|
||||
if(DEBUG) Serial.print(response);
|
||||
}
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.println();
|
||||
Serial.println("-------------------------------");
|
||||
}
|
||||
delay(1000);
|
||||
}
|
||||
}
|
||||
|
||||
/**********************************************************************************************
|
||||
Only required for cases of reading analog pin values.
|
||||
An int Array of analog pins that needs to be read has to be initialised.
|
||||
This method will traverse the array and publish the data from the selected pins
|
||||
***********************************************************************************************/
|
||||
|
||||
|
||||
void pushAnalogPinData(){
|
||||
for ( int pin = 0; pin < (sizeof(analogPins)/sizeof(int)); pin++) {
|
||||
String resource = " " + String(SERVICE_EPOINT) + String(PUSH_ALARM_DATA) + " ";
|
||||
|
||||
String payLoad = jsonPayLoad + "AnalogPinData";
|
||||
payLoad = payLoad + String(TIME_JSON) + "9999";
|
||||
payLoad = payLoad + String(KEY_JSON) + getDataType(analogPins[pin]);
|
||||
payLoad = payLoad + String(VALUE_JSON) + analogRead(analogPins[pin]);
|
||||
payLoad = payLoad + String(END_JSON);
|
||||
|
||||
if(DEBUG) Serial.println(payLoad);
|
||||
|
||||
httpClient.print(HTTP_POST);
|
||||
httpClient.print(resource);
|
||||
httpClient.println(HTTP_VERSION);
|
||||
httpClient.println(host);
|
||||
httpClient.println(HTTP_CONTENT_TYPE);
|
||||
httpClient.print(HTTP_CONTENT_LEN);
|
||||
httpClient.println(payLoad.length());
|
||||
httpClient.println();
|
||||
httpClient.println(payLoad);
|
||||
httpClient.println();
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.print(HTTP_POST);
|
||||
Serial.print(resource);
|
||||
Serial.println(HTTP_VERSION);
|
||||
Serial.println(host);
|
||||
Serial.println(HTTP_CONTENT_TYPE);
|
||||
Serial.print(HTTP_CONTENT_LEN);
|
||||
Serial.println(payLoad.length());
|
||||
Serial.println();
|
||||
Serial.println(payLoad);
|
||||
Serial.println();
|
||||
}
|
||||
|
||||
delay(1000);
|
||||
|
||||
while (httpClient.available()) {
|
||||
char response = httpClient.read();
|
||||
if(DEBUG) Serial.print(response);
|
||||
}
|
||||
|
||||
if(DEBUG) {
|
||||
Serial.println();
|
||||
Serial.println("-------------------------------");
|
||||
}
|
||||
delay(1000);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -0,0 +1,6 @@
|
||||
[Device-Configurations]
|
||||
owner = ${DEVICE_OWNER}
|
||||
deviceId = ${DEVICE_ID}
|
||||
auth-method = token
|
||||
auth-token = ${DEVICE_TOKEN}
|
||||
refresh-token = ${DEVICE_REFRESH_TOKEN}
|
||||
@ -1,2 +1,2 @@
|
||||
templates=FireAlarmEthernetAgent.h
|
||||
zipfilename=FireAlarmEthernetAgent.zip
|
||||
templates=deviceConfigs.cfg
|
||||
zipfilename=FireAlarmAgent.zip
|
||||
|
||||
@ -0,0 +1,130 @@
|
||||
#!/bin/bash
|
||||
|
||||
echo "----------------------------------------------------------------"
|
||||
echo "| WSO2 IOT Sample "
|
||||
echo "| RaspiAlarm "
|
||||
echo "| ---------------- "
|
||||
echo "| ....initializing startup-script "
|
||||
echo "----------------------------------------------------------------"
|
||||
|
||||
while true; do
|
||||
read -p "Do you wish to run 'apt-get update' and continue? [Yes/No] " yn
|
||||
case $yn in
|
||||
[Yy]* ) sudo apt-get update;
|
||||
break;;
|
||||
[Nn]* ) echo "Continuing without apt-get update...";
|
||||
break;;
|
||||
* ) echo "Please answer yes or no.";
|
||||
esac
|
||||
done
|
||||
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "apt-get update failed.... Some dependencies may not get installed"
|
||||
echo "If an already installed version of the package exists, try running:"
|
||||
echo "----------------------------------------------------------------"
|
||||
echo "sudo -i"
|
||||
echo "cd /var/lib/dpkg/info"
|
||||
echo "rm -rf wso2-raspi-alarm*"
|
||||
echo "dpkg --remove --force-remove-reinstreq wso2-raspi-alarm"
|
||||
echo "exit"
|
||||
echo "----------------------------------------------------------------"
|
||||
echo "Retry Installation...."
|
||||
break;
|
||||
fi
|
||||
|
||||
echo "Installing 'gdebi' package..."
|
||||
sudo apt-get install gdebi # installation of gdebi
|
||||
|
||||
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "gdebi installation failed.... dependencies will not be installed without gdebi"
|
||||
read -p "Do you wish to continue without gdebi? [Yes/No] " yn
|
||||
case $yn in
|
||||
[Yy]* ) echo "Continueing without gdebi.....";;
|
||||
[Nn]* ) echo "Try to resolve errors and re-run the script.";
|
||||
exit;;
|
||||
* ) exit;;
|
||||
esac
|
||||
fi
|
||||
|
||||
|
||||
for f in ./wso2-raspi-alarm_1.0_armhf.deb; do
|
||||
## Check if the glob gets expanded to existing files.
|
||||
## If not, f here will be exactly the pattern above
|
||||
## and the exists test will evaluate to false.
|
||||
# [ -e "$f" ] && echo "'wso2-raspi-alarm_1.0_armhf.deb' file found and installing" || echo "'wso2-raspi-alarm_1.0_armhf.deb' file does not exist in current path"; exit;
|
||||
if [ -e "$f" ]; then
|
||||
echo "'wso2-raspi-alarm_1.0_armhf.deb' file found and installing now...."
|
||||
else
|
||||
echo "'wso2-raspi-alarm_1.0_armhf.deb' file does not exist in current path. \nExiting installation...";
|
||||
exit;
|
||||
fi
|
||||
## This is all we needed to know, so we can break after the first iteration
|
||||
break
|
||||
done
|
||||
|
||||
echo "Installing the 'wso2-raspi-alarm deb package'"
|
||||
sudo gdebi wso2-raspi-alarm_1.0_armhf.deb
|
||||
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "Installation Failed...."
|
||||
exit;
|
||||
fi
|
||||
|
||||
|
||||
for f in ./deviceConfigs.cfg; do
|
||||
## Check if the glob gets expanded to existing files.
|
||||
## If not, f here will be exactly the pattern above
|
||||
## and the exists test will evaluate to false.
|
||||
# [ -e "$f" ] && echo "'wso2-raspi-alarm_1.0_armhf.deb' file found and installing" || echo "'wso2-raspi-alarm_1.0_armhf.deb' file does not exist in current path"; exit;
|
||||
if [ -e "$f" ]; then
|
||||
echo "Configuration file found......"
|
||||
else
|
||||
echo "'deviceConfigs.cfg' file does not exist in current path. \nExiting installation...";
|
||||
exit;
|
||||
fi
|
||||
## This is all we needed to know, so we can break after the first iteration
|
||||
break
|
||||
done
|
||||
|
||||
echo "Copying configurations file to /usr/local/src/RaspberryAgent"
|
||||
sudo cp ./deviceConfigs.cfg /usr/local/src/RaspberryAgent/
|
||||
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "Copying configuration file failed...."
|
||||
exit;
|
||||
fi
|
||||
|
||||
echo "Running the RaspberryAgent service...."
|
||||
# sudo service RaspberryService.sh start
|
||||
|
||||
while true; do
|
||||
read -p "Whats the time-interval (in seconds) between successive Data-Pushes to the WSO2-DC (ex: '60' indicates 1 minute) > " input
|
||||
|
||||
if [ $input -eq $input 2>/dev/null ]
|
||||
then
|
||||
echo "Setting data-push interval to $input seconds."
|
||||
break;
|
||||
else
|
||||
echo "Input needs to be an integer indicating the number seconds between successive data-pushes."
|
||||
fi
|
||||
done
|
||||
|
||||
|
||||
cd /usr/local/src/RaspberryAgent/
|
||||
sudo nohup ./RaspberryStats.py -i $input > /dev/null 2>&1 &
|
||||
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "Could not start the service..."
|
||||
exit;
|
||||
fi
|
||||
|
||||
|
||||
echo "--------------------------------------------------------------------------"
|
||||
echo "| Successfully Started "
|
||||
echo "| -------------------------- "
|
||||
#echo "| run 'sudo service RaspberryService.sh status' to check status"
|
||||
#echo "| run 'sudo service RaspberryService.sh stop' to stop service"
|
||||
#echo "| -------------------------- "
|
||||
echo "| Find logs at: /usr/local/src/RaspberryAgent/logs/RaspberryStats.log"
|
||||
echo "---------------------------------------------------------------------------"
|
||||
Binary file not shown.
Loading…
Reference in new issue