parent
5dd57a157e
commit
3416a191c0
@ -1,16 +1,3 @@
|
|||||||
#/*
|
|
||||||
# * Copyright (c) 2016, WSO2 Inc. (http://www.wso2.org) All Rights Reserved.
|
|
||||||
# * WSO2 Inc. licenses this file to you under the Apache License,
|
|
||||||
# * Version 2.0 (the "License"); you may not use this file except
|
|
||||||
# * in compliance with the License.
|
|
||||||
# * You may obtain a copy of the License at
|
|
||||||
# * http://www.apache.org/licenses/LICENSE-2.0
|
|
||||||
# * Unless required by applicable law or agreed to in writing,
|
|
||||||
# * software distributed under the License is distributed on an
|
|
||||||
# * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
|
||||||
# * KIND, either express or implied. See the License for the
|
|
||||||
# * specific language governing permissions and limitations
|
|
||||||
# * under the License.
|
|
||||||
# */
|
|
||||||
templates=deviceConfig.properties
|
templates=deviceConfig.properties
|
||||||
zipfilename=doormanager.zip
|
zipfilename=doormanager.zip
|
||||||
|
|
||||||
|
@ -0,0 +1,194 @@
|
|||||||
|
#!/usr/bin/env python
|
||||||
|
"""
|
||||||
|
/**
|
||||||
|
* Copyright (c) 2016, WSO2 Inc. (http://www.wso2.org) All Rights Reserved.
|
||||||
|
*
|
||||||
|
* WSO2 Inc. licenses this file to you under the Apache License,
|
||||||
|
* Version 2.0 (the "License"); you may not use this file except
|
||||||
|
* in compliance with the License.
|
||||||
|
* You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing,
|
||||||
|
* software distributed under the License is distributed on an
|
||||||
|
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
||||||
|
* KIND, either express or implied. See the License for the
|
||||||
|
* specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
**/
|
||||||
|
"""
|
||||||
|
|
||||||
|
import argparse
|
||||||
|
import httplib
|
||||||
|
import logging
|
||||||
|
import logging.handlers
|
||||||
|
import signal
|
||||||
|
import ssl
|
||||||
|
import sys
|
||||||
|
import threading
|
||||||
|
import time
|
||||||
|
from functools import wraps
|
||||||
|
|
||||||
|
import RPi.GPIO as GPIO
|
||||||
|
|
||||||
|
import MQTTHandler
|
||||||
|
import RFIDReader
|
||||||
|
import iotUtils
|
||||||
|
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# Overriding the default SSL version used in some of the Python (2.7.x) versions
|
||||||
|
# This is a known issue in earlier Python releases
|
||||||
|
# But was fixed in later versions. Ex-2.7.11
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def sslwrap(func):
|
||||||
|
@wraps(func)
|
||||||
|
def bar(*args, **kw):
|
||||||
|
kw['ssl_version'] = ssl.PROTOCOL_TLSv1
|
||||||
|
return func(*args, **kw)
|
||||||
|
|
||||||
|
return bar
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
PUSH_INTERVAL = 5000 # time interval between successive data pushes in seconds
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# Logger defaults
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
LOG_FILENAME = "DoorManagerAgent.log"
|
||||||
|
logging_enabled = False
|
||||||
|
LOG_LEVEL = logging.INFO # Could be e.g. "DEBUG" or "WARNING"
|
||||||
|
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# Python version
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
if sys.version_info < (2, 6, 0):
|
||||||
|
sys.stderr.write("You need python 2.6.0 or later to run this script\n")
|
||||||
|
exit(1)
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# Define and parse command line arguments
|
||||||
|
# If the log file is specified on the command line then override the default
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
parser = argparse.ArgumentParser(description="Python service to push RPi info to the Device Cloud")
|
||||||
|
parser.add_argument("-l", "--log", help="file to write log to (default '" + LOG_FILENAME + "')")
|
||||||
|
|
||||||
|
help_string_for_data_push_interval = "time interval between successive locker status push to server(default '" + str(
|
||||||
|
PUSH_INTERVAL) + "')"
|
||||||
|
parser.add_argument("-i", "--interval", type=int, help=help_string_for_data_push_interval)
|
||||||
|
|
||||||
|
args = parser.parse_args()
|
||||||
|
if args.log:
|
||||||
|
LOG_FILENAME = args.log
|
||||||
|
|
||||||
|
if args.interval:
|
||||||
|
PUSH_INTERVAL = args.interval
|
||||||
|
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# A class we can use to capture stdout and sterr in the log
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
class IOTLogger(object):
|
||||||
|
def __init__(self, logger, level):
|
||||||
|
"""Needs a logger and a logger level."""
|
||||||
|
self.logger = logger
|
||||||
|
self.level = level
|
||||||
|
|
||||||
|
def write(self, message):
|
||||||
|
if message.rstrip() != "": # Only log if there is a message (not just a new line)
|
||||||
|
self.logger.log(self.level, message.rstrip())
|
||||||
|
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# Configure logging to log to a file,
|
||||||
|
# making a new file at midnight and keeping the last 3 day's data
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def configureLogger(loggerName):
|
||||||
|
logger = logging.getLogger(loggerName)
|
||||||
|
logger.setLevel(LOG_LEVEL) # Set the log level to LOG_LEVEL
|
||||||
|
handler = logging.handlers.TimedRotatingFileHandler(LOG_FILENAME, when="midnight",
|
||||||
|
backupCount=3) # Handler that writes to a file,
|
||||||
|
# ~~~make new file at midnight and keep 3 backups
|
||||||
|
formatter = logging.Formatter('%(asctime)s %(levelname)-8s %(message)s') # Format each log message like this
|
||||||
|
handler.setFormatter(formatter) # Attach the formatter to the handler
|
||||||
|
logger.addHandler(handler) # Attach the handler to the logger
|
||||||
|
|
||||||
|
if (logging_enabled):
|
||||||
|
sys.stdout = IOTLogger(logger, logging.INFO) # Replace stdout with logging to file at INFO level
|
||||||
|
sys.stderr = IOTLogger(logger, logging.ERROR) # Replace stderr with logging to file at ERROR level
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# This is a Thread object for reading RFID card
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
class ListenRFIDhread(object):
|
||||||
|
def __init__(self):
|
||||||
|
thread = threading.Thread(target=self.run, args=())
|
||||||
|
thread.daemon = True # Daemonize thread
|
||||||
|
thread.start() # Start the execution
|
||||||
|
|
||||||
|
def run(self):
|
||||||
|
RFIDReader.main()
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# This is a Thread object for listening for MQTT Messages
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
class ListenMQTTThread(object):
|
||||||
|
def __init__(self):
|
||||||
|
thread = threading.Thread(target=self.run, args=())
|
||||||
|
thread.daemon = True # Daemonize thread
|
||||||
|
thread.start() # Start the execution
|
||||||
|
|
||||||
|
def run(self):
|
||||||
|
MQTTHandler.main()
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# When sysvinit sends the TERM signal, cleanup before exiting
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def sigterm_handler(_signo, _stack_frame):
|
||||||
|
print("[] received signal {}, exiting...".format(_signo))
|
||||||
|
sys.exit(0)
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
signal.signal(signal.SIGTERM, sigterm_handler)
|
||||||
|
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# This method used to initialize GPIO ports
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def initDoorLock():
|
||||||
|
# GPIO.setmode(GPIO.BOARD)
|
||||||
|
GPIO.setup(iotUtils.DOOR_LOCKER_1_PORT, GPIO.OUT, initial=GPIO.HIGH)
|
||||||
|
GPIO.setup(iotUtils.DOOR_LOCKER_2_PORT, GPIO.OUT, initial=GPIO.HIGH)
|
||||||
|
GPIO.setup(iotUtils.LOCK_STATE_ON_NOTIFY_PORT, GPIO.OUT, initial=GPIO.LOW)
|
||||||
|
GPIO.setup(iotUtils.LOCK_STATE_OFF_NOTIFY_PORT, GPIO.OUT, initial=GPIO.LOW)
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# The Main method of the Automatic Door Locker Agent
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def main():
|
||||||
|
configureLogger("AutomaticDoorLocker")
|
||||||
|
ListenMQTTThread()
|
||||||
|
ListenRFIDhread()
|
||||||
|
initDoorLock()
|
||||||
|
# registerUIDofRFIDCard() # Call the register endpoint and register Device I
|
||||||
|
# ListenMQTTThread()
|
||||||
|
while True:
|
||||||
|
try:
|
||||||
|
time.sleep(PUSH_INTERVAL)
|
||||||
|
except (KeyboardInterrupt, Exception) as e:
|
||||||
|
print "AutomaticDoorLockerStats: Exception in RaspberryAgentThread (either KeyboardInterrupt or Other)"
|
||||||
|
print ("AutomaticDoorLockerStats: " + str(e))
|
||||||
|
print '~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'
|
||||||
|
pass
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
if __name__ == "__main__":
|
||||||
|
main()
|
@ -0,0 +1,396 @@
|
|||||||
|
#!/usr/bin/env python
|
||||||
|
# -*- coding: utf8 -*-
|
||||||
|
|
||||||
|
import RPi.GPIO as GPIO
|
||||||
|
import spi
|
||||||
|
import signal
|
||||||
|
import time
|
||||||
|
|
||||||
|
class MFRC522:
|
||||||
|
NRSTPD = 22
|
||||||
|
|
||||||
|
MAX_LEN = 16
|
||||||
|
|
||||||
|
PCD_IDLE = 0x00
|
||||||
|
PCD_AUTHENT = 0x0E
|
||||||
|
PCD_RECEIVE = 0x08
|
||||||
|
PCD_TRANSMIT = 0x04
|
||||||
|
PCD_TRANSCEIVE = 0x0C
|
||||||
|
PCD_RESETPHASE = 0x0F
|
||||||
|
PCD_CALCCRC = 0x03
|
||||||
|
|
||||||
|
PICC_REQIDL = 0x26
|
||||||
|
PICC_REQALL = 0x52
|
||||||
|
PICC_ANTICOLL = 0x93
|
||||||
|
PICC_SElECTTAG = 0x93
|
||||||
|
PICC_AUTHENT1A = 0x60
|
||||||
|
PICC_AUTHENT1B = 0x61
|
||||||
|
PICC_READ = 0x30
|
||||||
|
PICC_WRITE = 0xA0
|
||||||
|
PICC_DECREMENT = 0xC0
|
||||||
|
PICC_INCREMENT = 0xC1
|
||||||
|
PICC_RESTORE = 0xC2
|
||||||
|
PICC_TRANSFER = 0xB0
|
||||||
|
PICC_HALT = 0x50
|
||||||
|
|
||||||
|
MI_OK = 0
|
||||||
|
MI_NOTAGERR = 1
|
||||||
|
MI_ERR = 2
|
||||||
|
|
||||||
|
Reserved00 = 0x00
|
||||||
|
CommandReg = 0x01
|
||||||
|
CommIEnReg = 0x02
|
||||||
|
DivlEnReg = 0x03
|
||||||
|
CommIrqReg = 0x04
|
||||||
|
DivIrqReg = 0x05
|
||||||
|
ErrorReg = 0x06
|
||||||
|
Status1Reg = 0x07
|
||||||
|
Status2Reg = 0x08
|
||||||
|
FIFODataReg = 0x09
|
||||||
|
FIFOLevelReg = 0x0A
|
||||||
|
WaterLevelReg = 0x0B
|
||||||
|
ControlReg = 0x0C
|
||||||
|
BitFramingReg = 0x0D
|
||||||
|
CollReg = 0x0E
|
||||||
|
Reserved01 = 0x0F
|
||||||
|
|
||||||
|
Reserved10 = 0x10
|
||||||
|
ModeReg = 0x11
|
||||||
|
TxModeReg = 0x12
|
||||||
|
RxModeReg = 0x13
|
||||||
|
TxControlReg = 0x14
|
||||||
|
TxAutoReg = 0x15
|
||||||
|
TxSelReg = 0x16
|
||||||
|
RxSelReg = 0x17
|
||||||
|
RxThresholdReg = 0x18
|
||||||
|
DemodReg = 0x19
|
||||||
|
Reserved11 = 0x1A
|
||||||
|
Reserved12 = 0x1B
|
||||||
|
MifareReg = 0x1C
|
||||||
|
Reserved13 = 0x1D
|
||||||
|
Reserved14 = 0x1E
|
||||||
|
SerialSpeedReg = 0x1F
|
||||||
|
|
||||||
|
Reserved20 = 0x20
|
||||||
|
CRCResultRegM = 0x21
|
||||||
|
CRCResultRegL = 0x22
|
||||||
|
Reserved21 = 0x23
|
||||||
|
ModWidthReg = 0x24
|
||||||
|
Reserved22 = 0x25
|
||||||
|
RFCfgReg = 0x26
|
||||||
|
GsNReg = 0x27
|
||||||
|
CWGsPReg = 0x28
|
||||||
|
ModGsPReg = 0x29
|
||||||
|
TModeReg = 0x2A
|
||||||
|
TPrescalerReg = 0x2B
|
||||||
|
TReloadRegH = 0x2C
|
||||||
|
TReloadRegL = 0x2D
|
||||||
|
TCounterValueRegH = 0x2E
|
||||||
|
TCounterValueRegL = 0x2F
|
||||||
|
|
||||||
|
Reserved30 = 0x30
|
||||||
|
TestSel1Reg = 0x31
|
||||||
|
TestSel2Reg = 0x32
|
||||||
|
TestPinEnReg = 0x33
|
||||||
|
TestPinValueReg = 0x34
|
||||||
|
TestBusReg = 0x35
|
||||||
|
AutoTestReg = 0x36
|
||||||
|
VersionReg = 0x37
|
||||||
|
AnalogTestReg = 0x38
|
||||||
|
TestDAC1Reg = 0x39
|
||||||
|
TestDAC2Reg = 0x3A
|
||||||
|
TestADCReg = 0x3B
|
||||||
|
Reserved31 = 0x3C
|
||||||
|
Reserved32 = 0x3D
|
||||||
|
Reserved33 = 0x3E
|
||||||
|
Reserved34 = 0x3F
|
||||||
|
|
||||||
|
serNum = []
|
||||||
|
|
||||||
|
def __init__(self, dev='/dev/spidev0.0', spd=1000000):
|
||||||
|
spi.openSPI(device=dev,speed=spd)
|
||||||
|
GPIO.setmode(GPIO.BOARD)
|
||||||
|
GPIO.setup(22, GPIO.OUT)
|
||||||
|
GPIO.output(self.NRSTPD, 1)
|
||||||
|
self.MFRC522_Init()
|
||||||
|
|
||||||
|
def MFRC522_Reset(self):
|
||||||
|
self.Write_MFRC522(self.CommandReg, self.PCD_RESETPHASE)
|
||||||
|
|
||||||
|
def Write_MFRC522(self, addr, val):
|
||||||
|
spi.transfer(((addr<<1)&0x7E,val))
|
||||||
|
|
||||||
|
def Read_MFRC522(self, addr):
|
||||||
|
val = spi.transfer((((addr<<1)&0x7E) | 0x80,0))
|
||||||
|
return val[1]
|
||||||
|
|
||||||
|
def SetBitMask(self, reg, mask):
|
||||||
|
tmp = self.Read_MFRC522(reg)
|
||||||
|
self.Write_MFRC522(reg, tmp | mask)
|
||||||
|
|
||||||
|
def ClearBitMask(self, reg, mask):
|
||||||
|
tmp = self.Read_MFRC522(reg);
|
||||||
|
self.Write_MFRC522(reg, tmp & (~mask))
|
||||||
|
|
||||||
|
def AntennaOn(self):
|
||||||
|
temp = self.Read_MFRC522(self.TxControlReg)
|
||||||
|
if(~(temp & 0x03)):
|
||||||
|
self.SetBitMask(self.TxControlReg, 0x03)
|
||||||
|
|
||||||
|
def AntennaOff(self):
|
||||||
|
self.ClearBitMask(self.TxControlReg, 0x03)
|
||||||
|
|
||||||
|
def MFRC522_ToCard(self,command,sendData):
|
||||||
|
backData = []
|
||||||
|
backLen = 0
|
||||||
|
status = self.MI_ERR
|
||||||
|
irqEn = 0x00
|
||||||
|
waitIRq = 0x00
|
||||||
|
lastBits = None
|
||||||
|
n = 0
|
||||||
|
i = 0
|
||||||
|
|
||||||
|
if command == self.PCD_AUTHENT:
|
||||||
|
irqEn = 0x12
|
||||||
|
waitIRq = 0x10
|
||||||
|
if command == self.PCD_TRANSCEIVE:
|
||||||
|
irqEn = 0x77
|
||||||
|
waitIRq = 0x30
|
||||||
|
|
||||||
|
self.Write_MFRC522(self.CommIEnReg, irqEn|0x80)
|
||||||
|
self.ClearBitMask(self.CommIrqReg, 0x80)
|
||||||
|
self.SetBitMask(self.FIFOLevelReg, 0x80)
|
||||||
|
|
||||||
|
self.Write_MFRC522(self.CommandReg, self.PCD_IDLE);
|
||||||
|
|
||||||
|
while(i<len(sendData)):
|
||||||
|
self.Write_MFRC522(self.FIFODataReg, sendData[i])
|
||||||
|
i = i+1
|
||||||
|
|
||||||
|
self.Write_MFRC522(self.CommandReg, command)
|
||||||
|
|
||||||
|
if command == self.PCD_TRANSCEIVE:
|
||||||
|
self.SetBitMask(self.BitFramingReg, 0x80)
|
||||||
|
|
||||||
|
i = 2000
|
||||||
|
while True:
|
||||||
|
n = self.Read_MFRC522(self.CommIrqReg)
|
||||||
|
i = i - 1
|
||||||
|
if ~((i!=0) and ~(n&0x01) and ~(n&waitIRq)):
|
||||||
|
break
|
||||||
|
|
||||||
|
self.ClearBitMask(self.BitFramingReg, 0x80)
|
||||||
|
|
||||||
|
if i != 0:
|
||||||
|
if (self.Read_MFRC522(self.ErrorReg) & 0x1B)==0x00:
|
||||||
|
status = self.MI_OK
|
||||||
|
|
||||||
|
if n & irqEn & 0x01:
|
||||||
|
status = self.MI_NOTAGERR
|
||||||
|
|
||||||
|
if command == self.PCD_TRANSCEIVE:
|
||||||
|
n = self.Read_MFRC522(self.FIFOLevelReg)
|
||||||
|
lastBits = self.Read_MFRC522(self.ControlReg) & 0x07
|
||||||
|
if lastBits != 0:
|
||||||
|
backLen = (n-1)*8 + lastBits
|
||||||
|
else:
|
||||||
|
backLen = n*8
|
||||||
|
|
||||||
|
if n == 0:
|
||||||
|
n = 1
|
||||||
|
if n > self.MAX_LEN:
|
||||||
|
n = self.MAX_LEN
|
||||||
|
|
||||||
|
i = 0
|
||||||
|
while i<n:
|
||||||
|
backData.append(self.Read_MFRC522(self.FIFODataReg))
|
||||||
|
i = i + 1;
|
||||||
|
else:
|
||||||
|
status = self.MI_ERR
|
||||||
|
|
||||||
|
return (status,backData,backLen)
|
||||||
|
|
||||||
|
|
||||||
|
def MFRC522_Request(self, reqMode):
|
||||||
|
status = None
|
||||||
|
backBits = None
|
||||||
|
TagType = []
|
||||||
|
|
||||||
|
self.Write_MFRC522(self.BitFramingReg, 0x07)
|
||||||
|
|
||||||
|
TagType.append(reqMode);
|
||||||
|
(status,backData,backBits) = self.MFRC522_ToCard(self.PCD_TRANSCEIVE, TagType)
|
||||||
|
|
||||||
|
if ((status != self.MI_OK) | (backBits != 0x10)):
|
||||||
|
status = self.MI_ERR
|
||||||
|
|
||||||
|
return (status,backBits)
|
||||||
|
|
||||||
|
|
||||||
|
def MFRC522_Anticoll(self):
|
||||||
|
backData = []
|
||||||
|
serNumCheck = 0
|
||||||
|
|
||||||
|
serNum = []
|
||||||
|
|
||||||
|
self.Write_MFRC522(self.BitFramingReg, 0x00)
|
||||||
|
|
||||||
|
serNum.append(self.PICC_ANTICOLL)
|
||||||
|
serNum.append(0x20)
|
||||||
|
|
||||||
|
(status,backData,backBits) = self.MFRC522_ToCard(self.PCD_TRANSCEIVE,serNum)
|
||||||
|
|
||||||
|
if(status == self.MI_OK):
|
||||||
|
i = 0
|
||||||
|
if len(backData)==5:
|
||||||
|
while i<4:
|
||||||
|
serNumCheck = serNumCheck ^ backData[i]
|
||||||
|
i = i + 1
|
||||||
|
if serNumCheck != backData[i]:
|
||||||
|
status = self.MI_ERR
|
||||||
|
else:
|
||||||
|
status = self.MI_ERR
|
||||||
|
|
||||||
|
return (status,backData)
|
||||||
|
|
||||||
|
def CalulateCRC(self, pIndata):
|
||||||
|
self.ClearBitMask(self.DivIrqReg, 0x04)
|
||||||
|
self.SetBitMask(self.FIFOLevelReg, 0x80);
|
||||||
|
i = 0
|
||||||
|
while i<len(pIndata):
|
||||||
|
self.Write_MFRC522(self.FIFODataReg, pIndata[i])
|
||||||
|
i = i + 1
|
||||||
|
self.Write_MFRC522(self.CommandReg, self.PCD_CALCCRC)
|
||||||
|
i = 0xFF
|
||||||
|
while True:
|
||||||
|
n = self.Read_MFRC522(self.DivIrqReg)
|
||||||
|
i = i - 1
|
||||||
|
if not ((i != 0) and not (n&0x04)):
|
||||||
|
break
|
||||||
|
pOutData = []
|
||||||
|
pOutData.append(self.Read_MFRC522(self.CRCResultRegL))
|
||||||
|
pOutData.append(self.Read_MFRC522(self.CRCResultRegM))
|
||||||
|
return pOutData
|
||||||
|
|
||||||
|
def MFRC522_SelectTag(self, serNum):
|
||||||
|
backData = []
|
||||||
|
buf = []
|
||||||
|
buf.append(self.PICC_SElECTTAG)
|
||||||
|
buf.append(0x70)
|
||||||
|
i = 0
|
||||||
|
while i<5:
|
||||||
|
buf.append(serNum[i])
|
||||||
|
i = i + 1
|
||||||
|
pOut = self.CalulateCRC(buf)
|
||||||
|
buf.append(pOut[0])
|
||||||
|
buf.append(pOut[1])
|
||||||
|
(status, backData, backLen) = self.MFRC522_ToCard(self.PCD_TRANSCEIVE, buf)
|
||||||
|
|
||||||
|
if (status == self.MI_OK) and (backLen == 0x18):
|
||||||
|
print "Size: " + str(backData[0])
|
||||||
|
return backData[0]
|
||||||
|
else:
|
||||||
|
return 0
|
||||||
|
|
||||||
|
def MFRC522_Auth(self, authMode, BlockAddr, Sectorkey, serNum):
|
||||||
|
buff = []
|
||||||
|
|
||||||
|
# First byte should be the authMode (A or B)
|
||||||
|
buff.append(authMode)
|
||||||
|
|
||||||
|
# Second byte is the trailerBlock (usually 7)
|
||||||
|
buff.append(BlockAddr)
|
||||||
|
|
||||||
|
# Now we need to append the authKey which usually is 6 bytes of 0xFF
|
||||||
|
i = 0
|
||||||
|
while(i < len(Sectorkey)):
|
||||||
|
buff.append(Sectorkey[i])
|
||||||
|
i = i + 1
|
||||||
|
i = 0
|
||||||
|
|
||||||
|
# Next we append the first 4 bytes of the UID
|
||||||
|
while(i < 4):
|
||||||
|
buff.append(serNum[i])
|
||||||
|
i = i +1
|
||||||
|
|
||||||
|
# Now we start the authentication itself
|
||||||
|
(status, backData, backLen) = self.MFRC522_ToCard(self.PCD_AUTHENT,buff)
|
||||||
|
|
||||||
|
# Check if an error occurred
|
||||||
|
if not(status == self.MI_OK):
|
||||||
|
print "AUTH ERROR!!"
|
||||||
|
if not (self.Read_MFRC522(self.Status2Reg) & 0x08) != 0:
|
||||||
|
print "AUTH ERROR(status2reg & 0x08) != 0"
|
||||||
|
|
||||||
|
# Return the status
|
||||||
|
return status
|
||||||
|
|
||||||
|
def MFRC522_StopCrypto1(self):
|
||||||
|
self.ClearBitMask(self.Status2Reg, 0x08)
|
||||||
|
|
||||||
|
def MFRC522_Read(self, blockAddr):
|
||||||
|
recvData = []
|
||||||
|
recvData.append(self.PICC_READ)
|
||||||
|
recvData.append(blockAddr)
|
||||||
|
pOut = self.CalulateCRC(recvData)
|
||||||
|
recvData.append(pOut[0])
|
||||||
|
recvData.append(pOut[1])
|
||||||
|
(status, backData, backLen) = self.MFRC522_ToCard(self.PCD_TRANSCEIVE, recvData)
|
||||||
|
if not(status == self.MI_OK):
|
||||||
|
print "Error while reading!"
|
||||||
|
i = 0
|
||||||
|
if len(backData) == 16:
|
||||||
|
print "Sector "+str(blockAddr)+" "+str(backData)
|
||||||
|
|
||||||
|
def MFRC522_Write(self, blockAddr, writeData):
|
||||||
|
buff = []
|
||||||
|
buff.append(self.PICC_WRITE)
|
||||||
|
buff.append(blockAddr)
|
||||||
|
crc = self.CalulateCRC(buff)
|
||||||
|
buff.append(crc[0])
|
||||||
|
buff.append(crc[1])
|
||||||
|
(status, backData, backLen) = self.MFRC522_ToCard(self.PCD_TRANSCEIVE, buff)
|
||||||
|
if not(status == self.MI_OK) or not(backLen == 4) or not((backData[0] & 0x0F) == 0x0A):
|
||||||
|
status = self.MI_ERR
|
||||||
|
|
||||||
|
print str(backLen)+" backdata &0x0F == 0x0A "+str(backData[0]&0x0F)
|
||||||
|
if status == self.MI_OK:
|
||||||
|
i = 0
|
||||||
|
buf = []
|
||||||
|
while i < 16:
|
||||||
|
buf.append(writeData[i])
|
||||||
|
i = i + 1
|
||||||
|
crc = self.CalulateCRC(buf)
|
||||||
|
buf.append(crc[0])
|
||||||
|
buf.append(crc[1])
|
||||||
|
(status, backData, backLen) = self.MFRC522_ToCard(self.PCD_TRANSCEIVE,buf)
|
||||||
|
if not(status == self.MI_OK) or not(backLen == 4) or not((backData[0] & 0x0F) == 0x0A):
|
||||||
|
print "Error while writing"
|
||||||
|
if status == self.MI_OK:
|
||||||
|
print "Data written"
|
||||||
|
|
||||||
|
def MFRC522_DumpClassic1K(self, key, uid):
|
||||||
|
i = 0
|
||||||
|
while i < 64:
|
||||||
|
status = self.MFRC522_Auth(self.PICC_AUTHENT1A, i, key, uid)
|
||||||
|
# Check if authenticated
|
||||||
|
if status == self.MI_OK:
|
||||||
|
self.MFRC522_Read(i)
|
||||||
|
else:
|
||||||
|
print "Authentication error"
|
||||||
|
i = i+1
|
||||||
|
|
||||||
|
def MFRC522_Init(self):
|
||||||
|
GPIO.output(self.NRSTPD, 1)
|
||||||
|
|
||||||
|
self.MFRC522_Reset();
|
||||||
|
|
||||||
|
|
||||||
|
self.Write_MFRC522(self.TModeReg, 0x8D)
|
||||||
|
self.Write_MFRC522(self.TPrescalerReg, 0x3E)
|
||||||
|
self.Write_MFRC522(self.TReloadRegL, 30)
|
||||||
|
self.Write_MFRC522(self.TReloadRegH, 0)
|
||||||
|
|
||||||
|
self.Write_MFRC522(self.TxAutoReg, 0x40)
|
||||||
|
self.Write_MFRC522(self.ModeReg, 0x3D)
|
||||||
|
self.AntennaOn()
|
@ -0,0 +1,131 @@
|
|||||||
|
#!/usr/bin/env python
|
||||||
|
|
||||||
|
"""
|
||||||
|
/**
|
||||||
|
* Copyright (c) 2016, WSO2 Inc. (http://www.wso2.org) All Rights Reserved.
|
||||||
|
*
|
||||||
|
* WSO2 Inc. licenses this file to you under the Apache License,
|
||||||
|
* Version 2.0 (the "License"); you may not use this file except
|
||||||
|
* in compliance with the License.
|
||||||
|
* You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing,
|
||||||
|
* software distributed under the License is distributed on an
|
||||||
|
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
||||||
|
* KIND, either express or implied. See the License for the
|
||||||
|
* specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
**/
|
||||||
|
"""
|
||||||
|
|
||||||
|
import time
|
||||||
|
|
||||||
|
import RPi.GPIO as GPIO
|
||||||
|
import paho.mqtt.client as mqtt
|
||||||
|
import iotUtils
|
||||||
|
|
||||||
|
global mqttClient
|
||||||
|
mqttClient = mqtt.Client()
|
||||||
|
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# The callback for when the client receives a CONNACK response from the server.
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def on_connect(mqttClient, userdata, flags, rc):
|
||||||
|
print("MQTT_LISTENER: Connected with result code " + str(rc))
|
||||||
|
# Subscribing in on_connect() means that if we lose the connection and
|
||||||
|
# reconnect then subscriptions will be renewed.
|
||||||
|
print ("MQTT_LISTENER: Subscribing with topic " + TOPIC_TO_SUBSCRIBE)
|
||||||
|
mqttClient.subscribe(TOPIC_TO_SUBSCRIBE)
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# The callback for when a PUBLISH message is received from the server.
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def on_message(mqttClient, userdata, msg):
|
||||||
|
print("MQTT_LISTENER: " + msg.topic + " " + str(msg.payload))
|
||||||
|
request = str(msg.payload)
|
||||||
|
resource = ""
|
||||||
|
if (len(request.split(":")) == 2):
|
||||||
|
resource = request.split(":")[0].upper()
|
||||||
|
state = request.split(":")[1].upper()
|
||||||
|
if state == "LOCK":
|
||||||
|
GPIO.output(iotUtils.DOOR_LOCKER_2_PORT, GPIO.HIGH)
|
||||||
|
GPIO.output(iotUtils.DOOR_LOCKER_1_PORT, GPIO.HIGH)
|
||||||
|
GPIO.output(iotUtils.LOCK_STATE_OFF_NOTIFY_PORT, GPIO.HIGH)
|
||||||
|
GPIO.output(iotUtils.LOCK_STATE_ON_NOTIFY_PORT, GPIO.LOW)
|
||||||
|
mqttClient.publish(TOPIC_TO_PUBLISH, "Locker:LOCKED")
|
||||||
|
print "Door is locked"
|
||||||
|
elif state == "UNLOCK":
|
||||||
|
GPIO.output(iotUtils.DOOR_LOCKER_2_PORT, GPIO.LOW)
|
||||||
|
GPIO.output(iotUtils.DOOR_LOCKER_1_PORT, GPIO.LOW)
|
||||||
|
GPIO.output(iotUtils.LOCK_STATE_OFF_NOTIFY_PORT, GPIO.LOW)
|
||||||
|
GPIO.output(iotUtils.LOCK_STATE_ON_NOTIFY_PORT, GPIO.HIGH)
|
||||||
|
mqttClient.publish(TOPIC_TO_PUBLISH, "Locker:UNLOCKED")
|
||||||
|
print "Door is unlocked"
|
||||||
|
else:
|
||||||
|
print "MQTT message in the wrong format"
|
||||||
|
print "MQTT_LISTENER: Resource- " + resource
|
||||||
|
else:
|
||||||
|
print "MQTT message in the wrong format"
|
||||||
|
print "MQTT_LISTENER: Resource- " + resource
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# The callback for when a PUBLISH message to the server when door is open or close
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def on_publish(mqttClient, msg):
|
||||||
|
mqttClient.publish(TOPIC_TO_PUBLISH, msg)
|
||||||
|
|
||||||
|
|
||||||
|
def sendLockerStatus(msg):
|
||||||
|
global mqttClient
|
||||||
|
on_publish(mqttClient, msg)
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# The Main method of the server script
|
||||||
|
# This method is invoked from DoorLockerAgent.py on a new thread
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def main():
|
||||||
|
MQTT_ENDPOINT = iotUtils.MQTT_EP.split(":")
|
||||||
|
MQTT_IP = MQTT_ENDPOINT[1].replace('//', '')
|
||||||
|
MQTT_PORT = int(MQTT_ENDPOINT[2])
|
||||||
|
|
||||||
|
DEV_OWNER = iotUtils.DEVICE_OWNER
|
||||||
|
DEV_ID = iotUtils.DEVICE_ID
|
||||||
|
|
||||||
|
global TOPIC_TO_SUBSCRIBE
|
||||||
|
TOPIC_TO_SUBSCRIBE = "wso2/iot/" + DEV_OWNER + "/doormanager/" + DEV_ID + "/subscriber"
|
||||||
|
global TOPIC_TO_PUBLISH
|
||||||
|
TOPIC_TO_PUBLISH = "wso2/iot/" + DEV_OWNER + "/doormanager/" + DEV_ID + "/publisher"
|
||||||
|
|
||||||
|
print ("MQTT_LISTENER: MQTT_ENDPOINT is " + str(MQTT_ENDPOINT))
|
||||||
|
print ("MQTT_LISTENER: MQTT_TOPIC is " + TOPIC_TO_SUBSCRIBE)
|
||||||
|
global mqttClient
|
||||||
|
mqttClient.on_connect = on_connect
|
||||||
|
mqttClient.on_message = on_message
|
||||||
|
|
||||||
|
while True:
|
||||||
|
try:
|
||||||
|
mqttClient.connect(MQTT_IP, MQTT_PORT, 60)
|
||||||
|
print "MQTT_LISTENER: " + time.asctime(), "Connected to MQTT Broker - %s:%s" % (MQTT_IP, MQTT_PORT)
|
||||||
|
# Blocking call that processes network traffic, dispatches callbacks and
|
||||||
|
# handles reconnecting.
|
||||||
|
# Other loop*() functions are available that give a threaded interface and a
|
||||||
|
# manual interface.
|
||||||
|
mqttClient.loop_forever()
|
||||||
|
|
||||||
|
except (KeyboardInterrupt, Exception) as e:
|
||||||
|
print "MQTT_LISTENER: Exception in MQTTServerThread (either KeyboardInterrupt or Other)"
|
||||||
|
print ("MQTT_LISTENER: " + str(e))
|
||||||
|
|
||||||
|
mqttClient.disconnect()
|
||||||
|
print "MQTT_LISTENER: " + time.asctime(), "Connection to Broker closed - %s:%s" % (MQTT_IP, MQTT_PORT)
|
||||||
|
print '~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'
|
||||||
|
pass
|
||||||
|
|
||||||
|
if __name__ == '__main__':
|
||||||
|
main()
|
@ -0,0 +1,170 @@
|
|||||||
|
#!/usr/bin/env python
|
||||||
|
"""
|
||||||
|
/**
|
||||||
|
* Copyright (c) 2016, WSO2 Inc. (http://www.wso2.org) All Rights Reserved.
|
||||||
|
*
|
||||||
|
* WSO2 Inc. licenses this file to you under the Apache License,
|
||||||
|
* Version 2.0 (the "License"); you may not use this file except
|
||||||
|
* in compliance with the License.
|
||||||
|
* You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing,
|
||||||
|
* software distributed under the License is distributed on an
|
||||||
|
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
||||||
|
* KIND, either express or implied. See the License for the
|
||||||
|
* specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
**/
|
||||||
|
"""
|
||||||
|
|
||||||
|
import signal
|
||||||
|
|
||||||
|
import RPi.GPIO as GPIO
|
||||||
|
|
||||||
|
import MFRC522
|
||||||
|
import MQTTHandler
|
||||||
|
import iotUtils
|
||||||
|
import argparse
|
||||||
|
import httplib
|
||||||
|
import logging
|
||||||
|
import logging.handlers
|
||||||
|
import signal
|
||||||
|
import ssl
|
||||||
|
import sys
|
||||||
|
import threading
|
||||||
|
import time
|
||||||
|
from functools import wraps
|
||||||
|
|
||||||
|
CONTINUE_READING = True
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# Overriding the default SSL version used in some of the Python (2.7.x) versions
|
||||||
|
# This is a known issue in earlier Python releases
|
||||||
|
# But was fixed in later versions. Ex-2.7.11
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def sslwrap(func):
|
||||||
|
@wraps(func)
|
||||||
|
def bar(*args, **kw):
|
||||||
|
kw['ssl_version'] = ssl.PROTOCOL_TLSv1
|
||||||
|
return func(*args, **kw)
|
||||||
|
return bar
|
||||||
|
|
||||||
|
|
||||||
|
# Capture SIGINT for cleanup when the script is aborted
|
||||||
|
def end_read(signal,frame):
|
||||||
|
global CONTINUE_READING
|
||||||
|
print "Ctrl+C captured, ending read."
|
||||||
|
CONTINUE_READING = False
|
||||||
|
GPIO.cleanup()
|
||||||
|
|
||||||
|
# Hook the SIGINT
|
||||||
|
signal.signal(signal.SIGINT, end_read)
|
||||||
|
|
||||||
|
# Create an object of the class MFRC522
|
||||||
|
MIFAREReader = MFRC522.MFRC522()
|
||||||
|
global RFID_CARD_UID
|
||||||
|
RFID_CARD_UID = ""
|
||||||
|
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# Endpoint specific settings to connect with the IoT Server
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
SERVER_ENDPOINT = iotUtils.HTTPS_EP.split(":")
|
||||||
|
SERVER_IP = SERVER_ENDPOINT[1].replace('//', '')
|
||||||
|
SERVER_PORT = int(SERVER_ENDPOINT[2])
|
||||||
|
API_ENDPOINT_CONTEXT = iotUtils.CONTROLLER_CONTEXT
|
||||||
|
REGISTER_ENDPOINT = str(API_ENDPOINT_CONTEXT) + '/register'
|
||||||
|
APIM_SERVER_ENDPOINT = iotUtils.API_EP.split(":")
|
||||||
|
APIM_SERVER_IP = APIM_SERVER_ENDPOINT[1].replace('//', '')
|
||||||
|
APIM_SERVER_PORT = int(APIM_SERVER_ENDPOINT[2])
|
||||||
|
MANAGER_API_CONTEXT = iotUtils.MANAGER_CONTEXT
|
||||||
|
### ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# This method check whether the UID of RFID card is registered or not
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
def isRFIDCardRegistered( RFID_CARD_UID ):
|
||||||
|
ssl.wrap_socket = sslwrap(ssl.wrap_socket) # using the overridden sslwrap that uses TLSv1
|
||||||
|
print "Waiting to get UID of RFID card..."
|
||||||
|
if sys.version_info<(2,7,9):
|
||||||
|
dcConncection = httplib.HTTPSConnection(host=SERVER_IP, port=SERVER_PORT)
|
||||||
|
else:
|
||||||
|
dcConncection = httplib.HTTPSConnection(host=SERVER_IP, port=SERVER_PORT, context=ssl._create_unverified_context())
|
||||||
|
dcConncection.set_debuglevel(1)
|
||||||
|
dcConncection.connect()
|
||||||
|
PUSH_DATA = iotUtils.DEVICE_INFO_WITH_OWNER + iotUtils.DEVICE_DATA + RFID_CARD_UID
|
||||||
|
PUSH_DATA += '"}'
|
||||||
|
print PUSH_DATA
|
||||||
|
APIURL = str(MANAGER_API_CONTEXT)
|
||||||
|
dcConncection.putrequest('POST', APIURL)
|
||||||
|
dcConncection.putheader('Content-Type', 'application/json')
|
||||||
|
dcConncection.putheader('Authorization', 'Bearer ' + iotUtils.AUTH_TOKEN)
|
||||||
|
dcConncection.putheader('Content-Length', len(PUSH_DATA))
|
||||||
|
dcConncection.endheaders()
|
||||||
|
dcConncection.send(PUSH_DATA)
|
||||||
|
dcResponse = dcConncection.getresponse()
|
||||||
|
if(dcResponse.status < 250):
|
||||||
|
print "You are allowed to open the door"
|
||||||
|
isRegisteredUser = True
|
||||||
|
else:
|
||||||
|
isRegisteredUser = False
|
||||||
|
print "You are not allowed to open the door"
|
||||||
|
print ('DoorManager: ' + str(dcResponse.status))
|
||||||
|
print ('DoorManager: ' + str(dcResponse.reason))
|
||||||
|
print '~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'
|
||||||
|
print ('DoorManager: ' + str(APIURL))
|
||||||
|
print ('DoorManager: Response Message')
|
||||||
|
print str(dcResponse.msg)
|
||||||
|
dcConncection.close()
|
||||||
|
print '~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'
|
||||||
|
return isRegisteredUser
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~------
|
||||||
|
# Read RFID card and if user is authorized to given RFID card, then open the lock
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~------
|
||||||
|
def readUIDofRFID():
|
||||||
|
print "-----------------------------------Starting MFRC522 chip reader---------------------------------------------"
|
||||||
|
# This loop keeps checking for chips. If one is near it will get the UID and authenticate
|
||||||
|
while CONTINUE_READING:
|
||||||
|
# Scan for cards
|
||||||
|
(status,TagType) = MIFAREReader.MFRC522_Request(MIFAREReader.PICC_REQIDL)
|
||||||
|
# If a card is found
|
||||||
|
# Get the UID of the card
|
||||||
|
(status,uid) = MIFAREReader.MFRC522_Anticoll()
|
||||||
|
# If we have the UID, continue
|
||||||
|
if status == MIFAREReader.MI_OK:
|
||||||
|
global RFID_CARD_UID
|
||||||
|
RFID_CARD_UID = str(uid[0])+":"+str(uid[1])+":"+str(uid[2])+":"+str(uid[3])
|
||||||
|
print "Card read UID: " + RFID_CARD_UID
|
||||||
|
# This is the default key for authentication
|
||||||
|
key = [0xFF,0xFF,0xFF,0xFF,0xFF,0xFF]
|
||||||
|
# Select the scanned tag
|
||||||
|
MIFAREReader.MFRC522_SelectTag(uid)
|
||||||
|
# Authenticate
|
||||||
|
status = MIFAREReader.MFRC522_Auth(MIFAREReader.PICC_AUTHENT1A, 8, key, uid)
|
||||||
|
# Check if authenticated
|
||||||
|
if status == MIFAREReader.MI_OK:
|
||||||
|
MIFAREReader.MFRC522_Read(8)
|
||||||
|
MIFAREReader.MFRC522_StopCrypto1()
|
||||||
|
if(isRFIDCardRegistered(RFID_CARD_UID)):
|
||||||
|
print "Authentication successful"
|
||||||
|
GPIO.output(iotUtils.LOCK_STATE_OFF_NOTIFY_PORT, GPIO.LOW)
|
||||||
|
GPIO.output(iotUtils.LOCK_STATE_ON_NOTIFY_PORT, GPIO.HIGH)
|
||||||
|
GPIO.output(iotUtils.DOOR_LOCKER_2_PORT, GPIO.LOW)
|
||||||
|
GPIO.output(iotUtils.DOOR_LOCKER_1_PORT, GPIO.LOW)
|
||||||
|
MQTTHandler.on_publish(MQTTHandler.mqttClient,"Locker:UNLOCKED")
|
||||||
|
return True
|
||||||
|
|
||||||
|
def main():
|
||||||
|
global RFID_CARD_UID
|
||||||
|
RFID_CARD_UID = ""
|
||||||
|
readUIDofRFID()
|
||||||
|
|
||||||
|
if __name__ == '__main__':
|
||||||
|
main()
|
||||||
|
|
@ -0,0 +1,69 @@
|
|||||||
|
#!/usr/bin/env python
|
||||||
|
|
||||||
|
"""
|
||||||
|
/**
|
||||||
|
* Copyright (c) 2016, WSO2 Inc. (http://www.wso2.org) All Rights Reserved.
|
||||||
|
*
|
||||||
|
* WSO2 Inc. licenses this file to you under the Apache License,
|
||||||
|
* Version 2.0 (the "License"); you may not use this file except
|
||||||
|
* in compliance with the License.
|
||||||
|
* You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing,
|
||||||
|
* software distributed under the License is distributed on an
|
||||||
|
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
||||||
|
* KIND, either express or implied. See the License for the
|
||||||
|
* specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
**/
|
||||||
|
"""
|
||||||
|
|
||||||
|
import ConfigParser
|
||||||
|
import os
|
||||||
|
|
||||||
|
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
# Device specific info when pushing data to server
|
||||||
|
# Read from a file "deviceConfig.properties" in the same folder level
|
||||||
|
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
configParser = ConfigParser.RawConfigParser()
|
||||||
|
configFilePath = os.path.join(os.path.dirname(__file__), './deviceConfig.properties')
|
||||||
|
configParser.read(configFilePath)
|
||||||
|
|
||||||
|
DEVICE_OWNER = configParser.get('Device-Configurations', 'owner')
|
||||||
|
DEVICE_ID = configParser.get('Device-Configurations', 'deviceId')
|
||||||
|
SERIAL_NUMBER = configParser.get('Device-Configurations', 'deviceId')
|
||||||
|
MQTT_EP = configParser.get('Device-Configurations', 'mqtt-ep')
|
||||||
|
AUTH_TOKEN = configParser.get('Device-Configurations', 'auth-token')
|
||||||
|
USER_NAME = configParser.get('Device-Configurations', 'username')
|
||||||
|
CONTROLLER_CONTEXT = configParser.get('Device-Configurations', 'controller-context')
|
||||||
|
DEVICE_INFO = '{"owner":"' + DEVICE_OWNER + '","deviceId":"' + DEVICE_ID + '",'
|
||||||
|
HTTPS_EP = configParser.get('Device-Configurations', 'https-ep')
|
||||||
|
HTTP_EP = configParser.get('Device-Configurations', 'http-ep')
|
||||||
|
DEVICE_INFO_WITH_OWNER = '{"serialNumber":"' + SERIAL_NUMBER + '", "userName":"'+ USER_NAME +'","deviceId":"' + SERIAL_NUMBER + '",'
|
||||||
|
API_EP = configParser.get('Device-Configurations', 'apim-ep')
|
||||||
|
MANAGER_CONTEXT = configParser.get('Device-Configurations', 'manager-context')
|
||||||
|
DEVICE_DATA = '"cardNumber":"'
|
||||||
|
### ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
global IS_REGISTERED
|
||||||
|
IS_REGISTERED = False
|
||||||
|
|
||||||
|
DOOR_LOCKER_1_PORT = 16
|
||||||
|
DOOR_LOCKER_2_PORT = 18
|
||||||
|
LOCK_STATE_ON_NOTIFY_PORT = 11
|
||||||
|
LOCK_STATE_OFF_NOTIFY_PORT = 13
|
||||||
|
|
||||||
|
def isEmpty (string):
|
||||||
|
if string and string.strip():
|
||||||
|
#string is not None AND string is not empty or blank
|
||||||
|
return False
|
||||||
|
#string is None OR string is empty or blank
|
||||||
|
return True
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,59 @@
|
|||||||
|
#"""
|
||||||
|
#/**
|
||||||
|
#* Copyright (c) 2015, WSO2 Inc. (http://www.wso2.org) All Rights Reserved.
|
||||||
|
#*
|
||||||
|
#* WSO2 Inc. licenses this file to you under the Apache License,
|
||||||
|
#* Version 2.0 (the "License"); you may not use this file except
|
||||||
|
#* in compliance with the License.
|
||||||
|
#* You may obtain a copy of the License at
|
||||||
|
#*
|
||||||
|
#* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
#*
|
||||||
|
#* Unless required by applicable law or agreed to in writing,
|
||||||
|
#* software distributed under the License is distributed on an
|
||||||
|
#* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
|
||||||
|
#* KIND, either express or implied. See the License for the
|
||||||
|
#* specific language governing permissions and limitations
|
||||||
|
#* under the License.
|
||||||
|
#**/
|
||||||
|
#"""
|
||||||
|
|
||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
echo "----------------------------------------------------------------"
|
||||||
|
echo "| WSO2 IOT Door Manager "
|
||||||
|
echo "| Agent "
|
||||||
|
echo "| --------------------- "
|
||||||
|
echo "| ....initializing startup-script "
|
||||||
|
echo "----------------------------------------------------------------"
|
||||||
|
|
||||||
|
currentDir=$PWD
|
||||||
|
|
||||||
|
for f in ./deviceConfig.properties; do
|
||||||
|
## Check if the glob gets expanded to existing files.
|
||||||
|
## If not, f here will be exactly the pattern above
|
||||||
|
## and the exists test will evaluate to false.
|
||||||
|
if [ -e "$f" ]; then
|
||||||
|
echo "Configuration file found......"
|
||||||
|
else
|
||||||
|
echo "'deviceConfig.properties' file does not exist in current path. \nExiting installation...";
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
## This is all we needed to know, so we can break after the first iteration
|
||||||
|
break
|
||||||
|
done
|
||||||
|
|
||||||
|
cd $currentDir
|
||||||
|
|
||||||
|
cp deviceConfig.properties ./src
|
||||||
|
chmod +x ./src/DoorManagerAgent.py
|
||||||
|
sudo python ./src/DoorManagerAgent.py
|
||||||
|
|
||||||
|
if [ $? -ne 0 ]; then
|
||||||
|
echo "Could not start the service..."
|
||||||
|
exit;
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo "--------------------------------------"
|
||||||
|
echo "| Successfully Started "
|
||||||
|
echo "| -------------------------- "
|
Loading…
Reference in new issue